ME F221 Mechanisms and Machines
Lecture Notes & Slides58
[Lecture 1] discussion 1 on
[Lecture 10] Velocity Analysis on
[Lecture 11] Velocity Analysis on
[Lecture 12] Velocity Analysis on
[Lecture 13] Acceleration Analysis on
[Lecture 14] Acceleration Analysis on
[Lecture 15] Acceleration Analysis on
[Lecture 16] Instaneous Centre Method on
[Lecture 17] Instaneous Centre Method on
[Lecture 18] Velocity analysis using Instaneous Centre Method on
[Lecture 19] Cam and Follower Mechanism introduction
[Lecture 2] Introduction on
[Lecture 20] Cam Profile Synthesis Uniform Velocity
[Lecture 24] Cam Profile Synthesis Roller follower
[Lecture 25] Cam Profile Synthesis Offset follower
[Lecture 26] Cam Profile Synthesis Oscillating follower
[Lecture 27] Analysis of Follower Motions
[Lecture 28] Gears
[Lecture 3] Basics of Theory of Mechanisms on
[Lecture 30] Law of Gearing
[Lecture 31] Involute profile
[Lecture 32] Interference in Gears
[Lecture 33] Conditions to avoid Interference
[Lecture 34] initial and points of contact
[Lecture 35] Minimum number of teeth
[Lecture 36] Contact ratio in Gears
[Lecture 37] Force analysis in Gears
[Lecture 38] Gear Trains
[Lecture 39] Epicyclic Gear Trains
[Lecture 4] Four Bar Mechanism on
[Lecture 40] Epicyclic Gear Trains
[Lecture 41] Torue analysis of Epicyclic Gear Trains
[Lecture 42] Dynamic Analysis of Slider crank Mechanism
[Lecture 43] Dynamic Analysis of Slider crank Mechanism
[Lecture 44] Gas Load analysis
[Lecture 45] Dynamically Equivalent System
[Lecture 46] Correction couple
[Lecture 47] Radius of Gyration of CR
[Lecture 48] Flywheel
[Lecture 49] Flywheel for I C Engines
[Lecture 5] Different Closed chains on
[Lecture 50] Flywheel for punching machine
[Lecture 51] Governors
[Lecture 52] Governors
[Lecture 53] Governors
[Lecture 54] Balancing
[Lecture 55] Balancing
[Lecture 56] Balancing of reciprocating masses
[Lecture 57] Balancing of Multi cylinder Engines
[Lecture 58] Firing Order
[Lecture 6] Degree of Freedom on
[Lecture 7] DOF continued on
[Lecture 8] Inversions on
[Lecture 9] Slider Crank Inversions on
[Lecture 21] Cam Profile Synthesis Uniform acceleration Motion
[Lecture 22] Cam Profile Synthesis Simple Harmonic Motion
[Lecture 23] Cam Profile Synthesis Cycloidal Motion
[Lecture 29] Nomenclature
Miscellaneous1
Previous Year Questions12
No resources match all the selected tags.